ENM-223-R1 Module Configuration

Modbus address, baud, and calibration load automatically when you connect (no sync button). Calibration: press Enter in a field to send.

Active Modbus Configuration
Address: -- | Baud Rate: -- | Firmware: --
Serial Log: 

  


  

    
Meter Options

    

      

        
        
      

      

        
        
      

      

        
        
        editing… press Enter to send
      

    

    

      Note: Ucal removed. Sag reference is derived from Phase-A Ugain.
    

  


  

    
Calibration (Phase A / B / C)

    

    

      Gains: 0..65535. Offsets: -32768..32767. Press Enter in a field to send. While editing, live refresh is paused for that field.
    

  


  

    
Alarms (L1, L2, L3, Totals)

    

    

      
    

  


  

    
Relays (2)

    

  


  

    
Live Meter

    

  


  

    
Energies

    

    
Chip-sourced counters (saved in flash). New boards start at 0; values rise only when real power flows (check Live Meter P/S). Units: kWh / kvarh / kVAh.

  


  

    
Buttons (4)

    

  


  

    
User LEDs (4)

    

    

      Tip: set a LED source to Override R1 or Override R2 to light when a relay is in button override mode.